Serving all of Northwest Arkansas Mon - Fri: 7:30 AM - 5:00 PM
Glass installation in Northwest Arkansas
Residential Glazing

Frameless Shower Doors & Enclosures

Custom-measured, custom-fabricated frameless and semi-frameless shower enclosures in 3/8" and 1/2" tempered glass, built for Arkansas bathrooms and installed by career glaziers.

A frameless shower enclosure is the single most requested glass upgrade in Northwest Arkansas, and for good reason: it opens up the room, shows off your tile work, and never rusts, flakes, or fogs the way framed builder-grade units do.

Every enclosure we build starts with a laser measure of your curb, walls, and ceiling, because no shower opening in the real world is plumb and square. We fabricate to the millimeter, then hang the glass on commercial-grade hinges and clamps rated for decades of daily use.

Capabilities

What You Get

Low-iron ultra-clear glass

Standard clear glass carries a green cast. Low-iron glass shows your tile true to color, edge to edge.

3/8" and 1/2" tempered panels

All shower glass is fully tempered safety glass that meets CPSC 16 CFR 1201 Category II.

Hydrophobic coatings

Factory-applied coatings shed hard water before it etches, a real issue with NWA municipal water.

Premium hardware finishes

Brushed nickel, matte black, polished chrome, and satin brass hinges, pulls, and clamps.

Steam-ready enclosures

Transom panels and full-height glass engineered for steam showers.

Semi-frameless and sliding options

Barn-style sliders and semi-frameless units when budget or opening size calls for them.

Options

Common enclosure configurations

ConfigurationTypical glassBest for
Single hinged door3/8" temperedAlcove showers, tight bathrooms
Door + inline panel3/8" or 1/2"Wider alcoves, curbed showers
90-degree corner unit3/8" or 1/2"Corner showers, master baths
Barn-style slider3/8" temperedTub conversions, wide openings
Steam enclosure w/ transom1/2" temperedSteam generators, spa baths
Splash panel / fixed screen3/8" temperedWalk-in and curbless showers
Recent Work

From the Job Board

Frameless Shower Doors project photo
Frameless Shower Doors project photo
Frameless Shower Doors project photo
Frameless Shower Doors project photo
Frameless Shower Doors project photo
Frameless Shower Doors project photo
Questions

Frameless Shower Doors FAQ

How long does a custom shower enclosure take?
Plan on 2 to 3 weeks from field measure to installation. Tempered glass cannot be cut after it is heat-treated, so every panel is fabricated to your exact opening before it ships.
Is frameless glass safe?
Yes. Every panel is tempered safety glass that meets CPSC 16 CFR 1201 and ANSI Z97.1. If it ever breaks, it crumbles into small granular pieces rather than shards.
What about hard water stains?
We recommend a factory hydrophobic coating plus a squeegee habit. Northwest Arkansas water is moderately hard, and untreated glass will etch over a few years.
Can you replace just the glass in my existing frame?
Often, yes. We fabricate replacement panels for most framed and semi-frameless systems if the frame is sound.
Keep Reading

Related Articles

Free On-Site Estimates

Ready to Talk Frameless Shower Doors?

Free on-site measures across Northwest Arkansas. Real quotes from real glaziers, usually within one business day.